NetComm NB712 manual Bridge Mode, LAN Parameters, Enter Host Name

7.1 Bridge Mode

Before configuring the router in bridge mode, check with your ISP to ensure you have the necessary information.

Click Bridge and CPE Side to setup Bridging mode of the Router and then click Next.

Two SHDSL modes are available: CO, Central Office, and CPE, Customer Premises Equipment. For a connection with a DSLAM, the correct SHDSL mode is CPE. For a LAN to LAN connection, one side must be CO and the other side must be CPE.

LAN Parameters

Enter IP:	192.168.1.1
Enter Subnet Mask:	255.255.255.0
Enter Gateway:	192.168.1.254
	The Gateway IP is provided by ISP.
Enter Host Name:	SOHO

Some ISPs will require the host name as identification. You may need to check with your ISP to see if your Internet service has been configured with a host name. In most cases, this field can be ignored.

22	NB712 / NB714 User Guide
	YML829 Rev1