NetComm NB712 manual 14.7 Configuration

14.7 Configuration

To setup the router, move the cursor “ >>” to Enable and press the enter key. When the screen appears, type the supervisor password. The default supervisor password is admin. The password will be prompted as a “ * “ symbol for system security.

----------------------------------------------------------------------

Command: enable <CR>

Message: Please input the following information.

Supervisor password: ****

----------------------------------------------------------------------

In this sub menu, you can setup management features and upgrade software, backup the system configuration and restore the system configuration via utility tools.

Any changes will need to be written to EPROM and the router will need to be rebooted to work with the new settings.

The screen will prompt as follow.

>> enable	Modify command privilege
setup	Configure system
status	Show running system status
show	View system configuration
write	Update flash configuration
reboot	Reset and boot system
ping	Packet internet groper command
admin	Setup management features
utility	TFTP upgrade utility
exit	Quit system

The description of the commands are:

Command	Description
enable	Modify command privilege. When you login via serial
	console or Telnet, the router defaults to a program execution
	(read-only) privileges. To change the configuration and write
	changes to nonvolatile RAM (NVRAM), you must work in
	enable mode.
setup	To configure the product, you have to use the setup
	command.
status	View the status of product.
show	Show the system and configuration of product.
write	Update flash configuration. After you have completed all
	necessary settings, write the new configuration to NVRAM
	by the “write” command and reboot the system, or all of your
	changes will not take effect.
reboot	Reset and boot system. After you have completed all
	necessary changes, write the new configuration to NVRAM
	and reboot the system by “reboot” command, or all of your
	changes will not take effect.

NB712 /	NB714 User Guide	85
YML829	Rev1