NetComm NB712 manual User Profile, Screen will prompt as follow

14.13.1 User Profile

You can use the user command to clear, modify and list the user profiles. You can define up to five users to access the router via console port or telnet in user profile table however users who have the supervisor password can change the configuration of the router. Move the cursor “ >> “ to user and press enter key.

>> clear	Clear user	profile
modify	Modify the	user profile
list	List the user profile

You can delete the user by number using the clear command. Make sure the number of the user is correct. You can use list command to check it. Modify command is to modify any user information or add a new user to user profile.

To modify or add a new user, move the cursor to modify and press enter.

----------------------------------------------------------------------

Command: admin user modify <1~5> <more...>

Message: Please input the following information.

Legal access user profile number <1~5> : 2

----------------------------------------------------------------------

The screen will prompt as follow.

>> Attrib	UI mode
Profile	User name and password

There are two UI mode, command and menu mode, to setup the product. We will not discuss command mode in this manual.

14.13.2 Security

Security command can be configured sixteen legal IP address for telnet access and telnet port number.

Move the cursor “ >> “ to security and press enter. The default legal address is 0.0.0.0 which means that there is no IP restriction to access the router via telnet.

>> port	Configure telent TCP port
ip_pool	Legal address IP address pool
list	Show security profile

90	NB712 / NB714 User Guide
	YML829 Rev1