Force10 Networks S2410s manual Spanning-tree bpdumigrationcheck, Spanning-tree configuration name

spanning-tree bpdumigrationcheck

Default disabled

Mode Global Config

spanning-tree bpdumigrationcheck

Syntax

Mode

Command History

This command enables BPDU migration check on a given interface, by using unit/slot/port, or all interfaces, by using the all keyword.

The no version of this command disables BPDU migration check on all interfaces or the designated interface.

[no] spanning-tree bpdumigrationcheck {unit/slot/port all} Global Config

Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.

spanning-tree configuration name

	This command sets the Configuration Identifier Name for use in identifying the configuration
	that this switch is currently using. The name is a string of at most 32 characters.
	The no version of this command resets the Configuration Identifier Name to its default.
Syntax	[no] spanning-tree configuration name name
Default	The base MAC address displayed using hexadecimal notation as specified in IEEE 802
	standard.
Mode	Global Config

spanning-tree configuration revision

This command sets the Configuration Identifier Revision Level for use in identifying the configuration that this switch is currently using. The Configuration Identifier Revision Level is a number in the range of 0 to 65535.

266 Spanning Tree (STP) Commands