Force10 Networks S2410s manual Show port protocol, Shutdown Interface, Shutdown all

show port protocol

show port protocol

	This command displays the protocol-based VLAN information for either the entire system, or
	for the indicated group.
Syntax	show port protocol groupid
Mode	Privileged Exec
	Group Name—This field displays the group name of an entry in the protocol-based VLAN table.
	Group ID—This field displays the group identifier of the protocol group.
	Protocol(s)—This field indicates the type of protocol(s) for this group.
	VLAN—This field indicates the VLAN associated with this protocol group.
	Interface(s)—This field lists the unit/slot/port interface(s) that are associated with this protocol
	group.

shutdown (Interface)

Syntax

Default

Mode

Command

History

Related

Commands

This command disables a port.

The no version of this command enables a port.

[no] shutdown

enabled

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.

Version 2.3	Added Interface Range mode.
interface range	Defines an interface range and accesses the Interface Range mode
interface	Identifies an interface and enters the Interface Config mode.

shutdown all

This command disables all ports.

The no version of this command enables all ports.

SFTOS Command Reference for the S2410, Version 2.4.1.0 119