Force10 Networks S2410s Igmp interfacemode enable all, Igmp maxresponse, Igmp Snooping Commands

igmp interfacemode enable all

Mode

Command History

Related Commands

Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#; Interface VLAN.

Version 2.3	Modified: Revised from set igmp groupmembership-interval.Added
	Interface Range mode.
igmp enable (interface)		Enables IGMP Snooping on a selected interface.
set igmp		Sets the IGMP Group Membership Interval time globally.
groupmembership-interval
(global)
interface range		Defines an interface range and accesses the Interface Range mode
interface		Identifies an interface and enters the Interface Config mode.
igmp maxresponse		Sets the IGMP Maximum Response time on a selected interface.
show igmpsnooping		Displays IGMP Snooping status information.

igmp interfacemode enable all

Syntax

Default

Mode

Command History

Related Commands

This command enables IGMP Snooping on all interfaces. If an interface that has IGMP Snooping enabled is enlisted as a member of a LAG (port channel), IGMP Snooping functionality will be disabled on that interface. IGMP Snooping functionality will be subsequently re-enabled if LAG membership is removed from that interface.

[no] igmp interfacemode enable all

The no version of this command disables IGMP Snooping on all interfaces.

disabled Global Config

Version 2.3	Changed from set igmp interfacemode all
igmp enable (interface)		This command enables IGMP Snooping on a selected interface.
show igmpsnooping		Displays IGMP Snooping status.

igmp maxresponse

This command sets the IGMP maximum response time on a selected port or VLAN. The Maximum Response time is the amount of time in seconds that a switch will wait after sending a query on an interface because it did not receive a report for a particular group in that interface.

238 IGMP Snooping Commands