8.3 Device-Specific Commands
:SENSe : TELecom : FILTer?
Command type | Sequential command |
Response | <filter> = <CHARACTER RESPONSE DATA> |
Function | Makes a query of the filter setting. |
Restriction | HP'+LP, HPlq+LPsetting is disabled when the Bit Rate is set at 2.5 G or 5 G |
Example of use> : SENSe : TELecom : FILTer?
<HPlSLP
:SENSe : TELecom : MEASure : TYPE <mmode>
Command type | Sequential command | |
Parameter | <mmode> = <CHARACTER PROGRAM DATA> | |
| MANual | Manual measurement |
| SINGle | Single measurement |
| REPeat | Repeat measurement |
Function | Performs the measurement mode setting. | |
Example of use | Sets the measurement mode to the repeat measurement. | |
>: SENSe : MEASure : TYPE REPeat
:SENSe : TELecom : MEASure : TYPE?
Command type | Sequential command | |
Response | <mmode> = <CHARACTER RESPONSE DATA> | |
| MAN | Manual measurement |
| SING | Single measurement |
| REP | Repeat measurement |
Function | Makes a query of the measurement mode. | |
Example of use | > : SENSe : MEASure : TYPE'? | |
| < REP |
|
