![](/images/new-backgrounds/1311531/311531165x1.webp)
8.3 Device-Specific Commands
8.3.1INSTrument Subsystem
The INSTrument subsystem is used to specify the same setting for the transmission and reception or independent setting for each.
: INSTrurnent | 7 | : COUPle | <mode> |
| : COUPle? |
|
:INSTrument : COUPle <mode>
Command type | Sequential command |
Parameter | <mode> = <CHARACTER PROGRAM DATA> |
| ALL ............. Tx&Rx (Same) |
| NONE .......... Tx/Rx (Independent) |
Function | Specifies the selection of whether to establish the same setting for the transmission and |
| reception modules or independent setting for each. |
Restriction | When the mode is switched from Tx/Rx to Tx&Rx, the set value for Rx is set for the Bit |
| Rate. |
Example of use | Sets the same setting for the transmission and reception. |
>: INSTrument : COUPle ALL
:INSTrument : COUPle?
Command type | Sequential command |
Response | <mode> = <CHARACTER RESPONSE DATA> |
| Same as : INSTrument : COUPle |
Function | Makes a query of whether the setting is the same for the transmission and reception |
Example of use | > : INSTrument : COUPle? |
| < ALL |