![](/images/new-backgrounds/1311531/311531177x1.webp)
8.3 Device-Specific Commands
:SUORce :JlTTer : RANGe?
Command type | Transmission sequential command |
Response | <range> = <CHARACTER RESPONSE DATA> |
Function | Makes a query of the transmission jitter generation range |
Restriction | Effective when jitter is generated. |
| Restrictions on setting apply depending on the Bit Rate. |
I | Bit Rate | / | UI Ranae |
I | S G | 1 | 1.600. SO, 0.5 UI |
Example of use> : SOURce : JITTer : RANGe?
<UI05
:SUORce : JlTTer : AMPLitude?
Command type | Sequential command |
Response | <string> = <STRING RESPONSE DATA> |
Function | Performs reading of the value of Tx JITTer AMPLitude. |
Example of use< : SOURce : JITTer : AMPLitude?
>1.51
I
I