![](/images/new-backgrounds/1311531/311531211x1.webp)
Section 8 Device Message Details
:STATus : OPERation : CONDition?
Command type | Sequential command |
Response | <numeric> = <NR1 NUMERIC RESPONSE DATA> |
| 0 to 32,767 ........ Sum (decimal digit) of condition register bits |
Function Example of use
Makes a query of the details of the condition register of the OPERation status register.
When the bit being measured of the OPERation status register is ON (measurement being performed).
>: STATus : OPERation : CONDition?
<16
:STATus : OPERation : ENABle <numeric>
Command type Parameter
Function
Example of use
Sequential command
<numeric> = <DECIMAL NUMERIC PROGR.4M DATA>
0 to 32,767 ........ Sum (decimal digit) of elrentenable register bits
Sets the masking value of the event enable register of the OPERation status register. Masking at 0.
Sets the masking value in a manner that when the b ~ beingt measured of the event register switches ON. it will be reported to the status byte register.
>: STATus : OPERation : ENABle 16
:STATus : OPERation : ENABle?
Command type Response
Function Example of use
Sequential command
< n u r n e r i o = <NR 1 NUMERIC RESPONSE DATA>
0 to 32,767 ........Sum (decimal digit) of event enable register bits
Makes a query of the details of the event enable register of the OPERation status register.
When only the bit being measured is enabled.
>: STATus : OPERation : ENABle?
<16