
8.3 Device-Specific Commands
:SENSe : MEASure : STATe?
Command type | Sequential command | |
Response | <mestype>, <numeric> | |
| <mestype> = <CHARACTER RESPONSE DATA> | |
| MAN | Manual measurement |
| NON | No target measurement found |
| <numeric> = <NR1 NUMERIC RESPONSE DATA> | |
| 0 | Measurement completed |
| 1 | Measurement current1y being performed |
Function | Makes a query of the measurement status. | |
Restriction | Measurement of only one item enabled to he executed. | |
| When no measurement is performed, the follow~ngindication is output. | |
| < NON, 0 |
|
Example of use | > : SENSe : MEASure : STATe? | |
| < M A N , 1 |
|
SENSe : MEASure : STARt
Command type | Sequential command |
Parameter | None |
Function | Begins measurement. |
Example of use | Begins measurement. |
>: SENSe : MEASure : STARt
:SENSe : MEASure : STOP
Command type | Sequential command |
Parameter | None |
Function | Halts measurement currently being executed. |
Restriction | None |
Example of use | > : SENSe : MEASure : STOP |