Huawei MC509 manual Rfswitch-Command for Setting the Flight Mode, Rfswitch?, Rfswitch =?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Network Service Interface Commands

6.5.2Interface Description

This command forced to set priorities network mode for the user.

6.5.3Parameter Description

<pref_mode >: 2: CDMA mode

4: HDR mode

8: CDMA/HDR HYBRID mode

6.6^rfswitch–Command for Setting the Flight Mode

6.6.1 Syntax

Command	Possible Response(s)
	<CR><LF>OK<CR><LF>
^RFSWITCH [=<SW state>]	In case of an MT-related error:
	<CR><LF>+CME ERROR: <err><CR><LF>
	<CR><LF>^ RFSWITCH:<SW state>,<HW
^ RFSWITCH?	state><CR><LF><CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR: <err><CR><LF>
^ RFSWITCH =?	<CR><LF>^ RFSWITCH: (0-1),(0-1)
	<CR><LF><CR><LF>OK<CR><LF>

6.6.2Interface Description

This command switches the RF and save the corresponding value, the query features include pin LGA interface PIN45 status query, LGA interface PIN45 pin determines the state of the state of the hardware switch. Background according to the return value of the order to determine the background screen when in operation, whether to pop-up message.

^RFSWITCH feature is equivalent to + CFUN function (the two values 0 and 1), based on the values save the corresponding value.

AT^RFSWITCH=0 equivalent to AT+CFUN=0

AT^RFSWITCH=1 equivalent to AT+CFUN=1

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	62
	Copyright © Huawei Technologies Co., Ltd.