Huawei MC509 11 +CLIP-Command for Setting the Presentation of Caller ID, +Clip?, +Clip=?, Urc

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Call Control Commands

7.11+CLIP–Command for Setting the Presentation of Caller ID

7.11.1 Syntax

Command	Possible Response(s)
+CLIP[=<n>]	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>
+CLIP?	<CR><LF>+CLIP:<n><CR><LF>
	<CR><LF>OK<CR><LF>
+CLIP=?	<CR><LF>+CLIP:(supported <n> list)<CR><LF>
	<CR><LF>OK<CR><LF>
URC	<CR><LF>+CLIP:<number>,<type>,,,,<CLI
	validity><CR><LF>

7.11.2Interface Description

The set command sets whether reporting of the caller ID unsolicited result code (URC) is allowed. If the caller ID URC is allowed to be reported, when there is an incoming call, the caller ID indication is provided following the RING indication and periodically (every five seconds) reported to the TE.

7.11.3Parameter Description

<n>:

0:Caller ID URC reporting is not allowed (default value after startup).

1:Caller ID URC reporting is allowed.

In case of using the command without <n>, <n> is set to 0.

<number>: Specifies a calling number. It is a string with double quotation marks. Allowed characters include only 0–9, *, #, and +.

<type>: Specifies the number type. "145" indicates an international number, and "129" indicates a national number. For details, see section 15.5 "Phone Number Type."

<CLI validity>:

0:The call line identity (CLI) is valid.

1:The CLI is rejected by the call originator.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	78
	Copyright © Huawei Technologies Co., Ltd.