Huawei MC509 manual Basic Configuration Commands, Echo Command, Command Possible Responses, Evalue

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Basic Configuration Commands

2 Basic Configuration Commands

2.1 E–Echo Command

2.1.1 Syntax

Command	Possible Response(s)
E[<value>]	<CR><LF>OK<CR><LF>

2.1.2Interface Description

This command sets whether the MT echoes the characters received from the TE.

The dial-up network, especially the automatic processing software automatically sends the ATE0 command to disable the echo mode, thus shortening the time for the client to parse the AT command.

2.1.3Parameter Description

<value>:

0:The MT does not echo the characters received from the TE.

1:The MT echoes the characters received from the TE (default value after startup). In case of using the command without <value>, <value> is set to 1.

After restart, <value> is set to 1.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	25
	Copyright © Huawei Technologies Co., Ltd.