Huawei MC509 manual HCMT-Command for Reporting a New Short Message

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	SMS Interface Commands

"SM": R-UIM short message storage medium

<index>: An integer, indicating the position of a short message in the storage medium.

8.4^HCMT–Command for Reporting a New Short Message

8.4.1 Syntax

Command	Possible Response(s)
	If PDU mode enabled：
	<CR><LF>^HCMT: [<reserved>],<length><CR><LF> <layer3
	packet><CR><LF>
	If text mode enabled：
	<CR><LF>^HCMT:<callerID>,<year>,<month>,<day>,<hour>,<
	minute>,<second>,<lang>,<format>,<length>,<prt>,<prv>,<type
	>,<tag><CR><LF><msg><ctrl-z><CR><LF>

8.4.2Interface Description

This command reports a new short message without storing it to the TE.

8.4.3Parameter Description

<callerID>: Specifies the number of the short message sender.

<year, month, day, hour, minute, second>: The year, month, day, hour, minute and second when a short message is received.

<lang>: Specifies the language. The values are as follows:

0:unspecified

1:English

6: Chinese

<format>: Specifies the encoding format of a short message. The values are as follows:

0:GSM 7 bit (not supported at present)

1:ASCII encoding (when the encoding range is not greater than 7F)

2:IA5 (not supported at present)

3:octet (not supported at present)

4:Latin (not supported at present)

5:Latin_Hebrew (not supported at present)

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	89
	Copyright © Huawei Technologies Co., Ltd.