Huawei MC509 manual IPSEND-Command for Transmitting TCP/UDP Data, IPSEND=? Crlfokcrlf

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Internet Service Interface Commands

10.4^IPSEND–Command for Transmitting TCP/UDP Data

10.4.1 Syntax

Command	Possible Response(s)
^IPSEND=<link_id>,<data>	<CR><LF>^IPSEND:<link_id><CR><LF>
	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>ERROR<CR><LF> or
	<CR><LF>+CME ERROR:<err><CR><LF>
^IPSEND=?	<CR><LF>OK<CR><LF>

10.4.2Interface Description

This command transmits subscriber data through an established connection.

10.4.3Parameter Description

<link_id >: Specifies the ID of an established connection. The value ranges from 1 to 5.

<data>: Specifies subscriber data. A maximum of 1,500 bytes enclosed by double quotation marks can be transmitted.

Only the subscriber data in the form of visible characters can be transmitted. To transmit invisible characters, they must first be converted into visible ones. In addition, subscriber data cannot contain quotation marks and commas.

10.4.4Example

AT^IPSEND=3,"ASDF"

^IPSEND:3

OK

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	117
	Copyright © Huawei Technologies Co., Ltd.