Huawei MC509 manual CRSSI-Command for Reporting the Rssi, Crssi, CRLFCRSSIrssiCRLFOKCRLF

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Network Service Interface Commands

6.10.2Interface Description

This command sets whether the signal strength is automatically reported.

6.10.3Parameter Description

<value>:

0:The signal strength is not reported.

1:The signal strength is reported (default value after startup).

6.11^CRSSI–Command for Reporting the RSSI

6.11.1 Syntax

Command	Possible Response(s)
^CRSSI	<CR><LF>^CRSSI:<rssi><CR><LF>OK<CR><LF
	>
	<CR><LF>^CRSSI:<rssi><CR><LF>

6.11.2Interface Description

The execution command queries the current receive signal strength indicator (RSSI).

When the RSSI change exceeds a threshold, the MT automatically reports the RSSI to the TE.

6.11.3Parameter Description

<rssi>: Indicates the received signal strength. The values are as follows:

0:The strength is equal to or less than –113 dBm.

1:The strength is equal to –111 dBm.

2...30: The strength is between –109 and –53 dBm.

31:The strength is equal to or greater than –51 dBm.

99:The strength is unknown or cannot be measured.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	66
	Copyright © Huawei Technologies Co., Ltd.