Huawei MC509 manual HCMGR-Command for Reading a Short Message, Crlfhcmgr ：, HCMGR=? Crlfokcrlf

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	SMS Interface Commands

In case of using the command without <stat>, <stat> is set to 0.

<index>: An integer, identifying the position in the storage medium.

<tag>: an integer:0~3

0:WMS_TAG_MT_NOT_READ

1:WMS_TAG_MT_READ

2:WMS_TAG_MO_NOT_SENT

3:WMS_TAG_MO_SENT

<length>：the length of the bytes of layer3 packet

8.14 ^HCMGR–Command for Reading a Short Message

8.14.1 Syntax

Command	Possible Response(s)
^HCMGR=<index>[,<mode>]	If PDU mode, command successful:
	<CR><LF>^HCMGR:
	<stat>,[<reserved>],<length><CR><LF> <layer3
	packet><CR><LF>
	If TEXT mode, command successful:
	<CR><LF>^HCMGR：
	<callerID>,<year>,<month>,<day>,<hour>,<minute
	>,<second>,<lang>,<format>,<length>,<prt>,<prv>
	,<type><stat><CR><LF><msg><ctrlz><CR><LF>
	OK<CR><LF>
	In case of an SMS-related error:
	<CR><LF>+CMS ERROR:<err><CR><LF>
^HCMGR=?	<CR><LF>OK<CR><LF>

8.14.2Interface Description

The execution command returns short messages with the storage position of <index> from the storage medium specified by <mem1>. Whether to modify the short message status depends on the value of <mode>.

8.14.3Parameter Description

<index>: An integer, identifying the position in the storage medium.

<mode>: Specifies the change mode of the short message status. The values are as follows:

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	103
	Copyright © Huawei Technologies Co., Ltd.