Huawei MC509 manual +Cmgf?, CRLF+CMGFmodeCRLF, +Cmgf=?, CRLF+CMGFlist of supported, ModesCRLF

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification		SMS Interface Commands
	Command	Possible Response(s)
	+CMGF?	<CR><LF>+CMGF:<mode><CR><LF>
		<CR><LF>OK<CR><LF>
	+CMGF=?	<CR><LF>+CMGF:(list of supported
		<mode>s)<CR><LF>
		<CR><LF>OK<CR><LF>

8.17.2Interface Description

The SET command is used to set the format of the short message. The format has two modes, and depends on the <mode> parameter. The two modes are: PDU mode and TEXT mode. The TEXT mode is unable to display Chinese. The format of message in PDU mode, refers to ^HCMGS command.

The READ command is used to return the current mode selection.

The TEST command returns the applicable <mode> values.

8.17.3Parameter Description

<mode>:

0PDU mode

1TEXT mode (Default)

If no <mode> is included, it is equivalent to the effect that the <mode> is 1.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	107
	Copyright © Huawei Technologies Co., Ltd.