Huawei MC509 manual Audio Commands, Swspath -Switch Sound Path, CPCM-Configure PCM audio

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Audio Commands

11 Audio Commands

11.1 ^SWSPATH -Switch Sound Path

11.1.1Command Syntax

Command	Possible response(s)
^SWSPATH=<n>	<CR><LF>OK<CR><LF>
	<CR><LF>ERROR<CR><LF>
^SWSPATH?	<CR><LF>^SWSPATH:<n><CR><LF>
	<CR><LF>OK<CR><LF>
^SWSPATH =?	<CR><LF>^ SWSPATH:(list of supported <n>s)
	<CR><LF><CR><LF>OK<CR><LF>

11.1.2Description

This command is used to switch sound path in voice call. Resetting the module will not affect the value. Module updating will reset the value to default value.

11.1.3Defined Values

<n>:

0handset (default)

1speaker

2PCM

11.2^CPCM-Configure PCM audio

Command Syntax

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	123
	Copyright © Huawei Technologies Co., Ltd.