Huawei MC509 manual DTMF-Two-Stage Dialing Command, At+Clcc, +CLCC1,0,0,0,0,13801000841,129

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Call Control Commands

<state>: Specifies the call state. The values are as follows:

0:active

1:held (not supported at present)

2:dialing

3:alerting (not supported at present)

4:incoming

5:waiting (not supported at present)

<mode>: Specifies the call type. The values are as follows:

0:voice

1:data

<mpty>: Specifies the multiparty call. The values are as follows:

0:non-multiparty call

1:multiparty call (not supported at present)

<number>: Specifies a call number. It is a string with double quotation marks. Allowed characters include only 0–9, *, #, and +. In addition, the + symbol can only be at the start of the number.

<type>: Specifies the type of a call number. "145" indicates an international number, and "129" indicates a national number. For details, see section 15.5 "Phone Number Type."

7.12.4Example

AT+CLCC

+CLCC:1,0,0,0,0,”13801000841”,129

OK

7.13 ^DTMF–Two-Stage Dialing Command

7.13.1 Syntax

Command	Possible Response(s)
^DTMF=<call_x>,<dtmf_digit>	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	80
	Copyright © Huawei Technologies Co., Ltd.