Huawei MC509 manual 15 +CTA-Command for Setting operating mode, +Cta?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Call Control Commands

7.14.2Interface Description

This command sets the Point to Point Protocol (PPP) user name and password before data service dial-up. After the dial-up connection is successful, the client can use the user name and password to establish a PPP connection.

7.14.3Parameter Description

<userid>: Specifies the PPP authentication user name. It is a string with double quotation marks. The maximum length is 127 characters excluding the double quotation marks.

<password>: Specifies the PPP authentication password. It is a string with double quotation marks. The maximum length is 127 characters excluding the double quotation marks.

7.14.4Example

AT^PPPCFG="Huawei","Huawei"

OK

7.15 +CTA–Command for Setting operating mode

7.15.1 Syntax

Command	Possible Response(s)
+CTA=<cta>	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>ERROR:<err><CR><LF>
+CTA?	<CR><LF>+CTA:<n><CR><LF>
	In case of an MT-related error:
	<CR><LF>ERROR:<err><CR><LF>
+CTA=?	<CR><LF>+CTA:(supported <n> list)<CR><LF>
	In case of an MT-related error:
	<CR><LF>ERROR:<err><CR><LF>

7.15.2Interface Description

Execution command use to set the time to enter the dormant.

Read command use to read the time to enter the dormant.

Test command use to test the time to enter the dormant.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	82
	Copyright © Huawei Technologies Co., Ltd.