Huawei MC509 Serial Port Control Commands, C-Command for Setting the Changing Mode of DCD Signals

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Serial Port Control Commands

5 Serial Port Control Commands

5.1&C–Command for Setting the Changing Mode of DCD Signals

5.1.1 Syntax

Command	Possible Response(s)
&C[<value>]	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>ERROR<CR><LF>

5.1.2Interface Description

This command sets the changing mode of DCD signals.

5.1.3Parameter Description

<value>:

0:DCD signals are always ON.

1:DCD signals are ON when there is a data carrier (default value after startup).

In case of using the command without <value>, <value> is set to 0.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	52
	Copyright © Huawei Technologies Co., Ltd.