GPSTYPE-Command for Quering GPS Type, Gpstype? | Huawei MC509

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification			GPS Commands

	Error code	Error description

	279	gpsOneXTRA disabled

	281	Invalid parameter

	282	Unable to delete data

	283	PD session is ongoing

	285	Too many parameters

14.10 ^GPSTYPE–Command for Quering GPS Type

14.10.1 Syntax

	Command			Possible Response(s)
	Command			Possible Response(s)

	^GPSTYPE?			<CR><LF>^GPSTYPE: <type><CR><LF>
				<CR><LF>OK<CR><LF>

14.10.2Interface Description

This command queries current GPS type.

14.10.3Parameter Description

<type>: indicates GPS type, integer in bits, 1 indicates supporting，0 indicates not supporting

Bits	Bit4	Bit3	Bit2	Bit1	Bit0

GPS Type	Cell-ID	gpsOneXTRA	User plane	Control plane	Standalones

bit0：indicates supporting standalone or not

bit1：indicates supporting control plane or not

bit2：indicates supporting user plane or not

bit3：indicates supporting gpsOneXTRA or not

bit4：indicates supporting Cell-ID or not <err>: error code or error description

	Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	144
		Copyright © Huawei Technologies Co., Ltd.

Image 144

Huawei MC509 GPSTYPE-Command for Quering GPS Type, Gpstype?, Crlfgpstype typeCRLF, This command queries current GPS type

Contents

AT Command Interface Specification Issue Date No Warranty About This Document HistoryVersion Date Chapter Descriptions Contents Identity Information Query Commands Example Security Control Commands Network Service Interface Commands Issue 01 Huawei Proprietary and Confidential Call Control Commands SMS Interface Commands 101 Internet Service Interface Commands 108 123 128 146 Content Description Overall DescriptionProduct Description Overview of AT Command Interfaces A command or a responseInstructions for Use Line feed character. For details, see the description in S4 2shows the basic organization format of the AT command line Prefixed with + 1Format of a basic command Command Format Description Command Command Format Description Type Abort Attributes of AT Commands Organization of This Document Chapter Description Chapter Description Basic Configuration Commands Echo CommandCommand Possible Responses Evalue S3-Command Line Termination Character S4-Response Format Character S5-Backspace Character S5=valueS5? CRLFvalueCRLF Command for Setting the Response Format String FormatV1 Digit Format Meaning Command for Controlling Return of the Execution Result F-Command for Restoring Factory SettingsCase of an MT-related error Crlferrorcrlf V-Command for Querying the Current Configuration Command Parameter+IFC +ICF +CNMI +CPMS A/-Command for Repeating the Previous Command +IPR+CMEE +CREG 10 +CMEE-Command for Setting the Error Report Format AT+CGSN+CMEE? +CMEE=? 11 +CFUN-Command for Setting the Operating Mode +CFUN?+CFUN=? VOLT-Command for Querying the voltage Reset Command for Delaying the Module Reset FunctionRESET? Volt MSO-Shutdown Command HS-Command for Shaking Hands with the TEMSO Crlfokcrlf Crlfcrlfokcrlf ATHS=0,0 HS494BBC7E,0,0,2,3 Identity Information Query Commands Command for Querying Product Identity InformationIvalue CRLFmodule infoCRLF +CGMI/+GMI-Command for Querying Manufacturer Information ATIAT+CGMI +CGMM/+GMM-Command for Querying Product Name +CGMR/+GMR-Command for Querying the Software VersionAT+CGMM +GSN-Command for Querying the ESN AT+CGMR+GSN CRLF+GSNESNCRLF Crlfokcrlf +CGSN-Command for Querying the ESN AT+GSN+GSN80469bb7 +CGSN Crlfesncrlf Crlfokcrlf +CGSN=? HWVER-Command for Querying the Hardware Version MEID-Command for Querying the Meid +CIMI-Command for Querying the Imsi ICCID-Command for Querying the IccidThere are a maximum of 15 characters MDN-Command for Querying the MDN ATICCID？MDN Atmdn MDN8613312121001 Security Control Commands +CLCK-Command for Enabling the PIN and Querying the StatusWhen mode≠2 and the command is successfully +CLCK=? +CPIN-PIN Management Command +CPIN=pin,newpin+CPIN? CRLF+CPINcodeCRLF CPIN-PIN Extension Management Command CPIN?CPIN=? Crlfokcrlf Parameter Description +CPWD-Command for Changing the Password +CPWD=? AT+CLCK=SC,2 +CLCK1 AT+CPWD=SC,1111,2222 Serial Port Control Commands C-Command for Setting the Changing Mode of DCD SignalsThis command sets the changing mode of DCD signals Cvalue S-Command for Setting the Changing Mode of DSR Signals DvalueSvalue +ICF-Command for Setting the Character Frame Format +ICF? +IPR-Command for Setting the Fixed Baud Rate +IPR=rate+IPR? CRLF+IPRrateCRLF +IFC-Command for Setting Flow Control +IFC?Crlf AT+IFC is equivalent to AT+IFC=0,0 Network Service Interface Commands SIMST-change of uim state instructionsCrlf Simst simstate Crlf SYSINFO-Command for Querying System Information Sysinfo DSDORMANT-Instructions into the dormant 8CDMA/HDR Hybrid0NOSRV 11REVA MODE-Command for Indicating the System Mode Change PREFMODE-Command for setting the network modeCrlferrorcrlf PREFMODE? Crlfokcrlf PREFMODE=? Rfswitch-Command for Setting the Flight Mode Prefmode 2 Cdma mode HDR mode CDMA/HDR Hybrid modeRFSWITCH? Rfswitch =? +CSQ-Command for Querying the Rssi Atrfswitch ?Rfswitch 0,1 RSSILVL-Command for Reporting the Rssi Test command queries the current Rssi and BER values HRSSILVL-Command for Reporting the HDR Rssi RSSIREP-Command for Setting the Reporting of the RssiRSSIREP? RSSIREP=? CRSSI-Command for Reporting the Rssi CrssiCRLFCRSSIrssiCRLFOKCRLF CRLFCRSSIrssiCRLF HDRRSSI-Command for Reporting the HDR Rssi HdrrssiTime COTKSLACT-Command for Defining a Subscriber AttimeCOTKSLACT=MDN,MIN Crlfokcrlf COTKSLACT? Crlfokcrlf COTKSLACT=? OTAACTED-Command for Querying the OTA Activation Status OTACMSG-Command for Indicating the OTA Update StatusOTAACTED? CURRSID-Command for Query SID of The Current System CURRSID?CURRSID=? Crlfokcrlf Atcurrsid Atcurrsid CURRSID0,0,8E4FC CURRSID0,0,0 Call Control Commands Command for Originating a Data Service CallCrlfno Carriercrlf Command for Disconnecting the Data Service +CDV-Command for Originating a Voice CallHvalue +CDVdialstring +CHV-Command for Disconnecting a Voice Call Command for Answering a Call aThis command disconnects a voice call AT+CDV13372311111 ORIG0,0 RING-Command for Indicating a Call S0-Command for Setting Automatic AnswerS0=value S0? CRLFvalueCRLF ORIG-Command for Indicating the Origination of a Call CONN-Command for Indicating a Call ConnectionThis command indicates that the MT is originating a call CEND-Command for Indicating the End of a Call CRLFCENDcallx,duration,endstatus,cccaUseCRLF 11 +CLIP-Command for Setting the Presentation of Caller ID +CLIP?+CLIP=? URC 12 +CLCC-Command for Querying the Call Status +CLCC+CLCC=? Crlfokcrlf DTMF-Two-Stage Dialing Command AT+CLCC+CLCC1,0,0,0,0,13801000841,129 DTMF=callx,dtmfdigit PPPCFG-Command for Setting the PPP User Name and Password PPPCFG=userid,passwordPppcfg or PPPCFG? CRLFPPPCFGuserid,password AT+CDV10000 ORIG2,0 CONN2,0 15 +CTA-Command for Setting operating mode +CTA? Cta the time to enter the dormant SMS Interface Commands +CPMS?+CPMS=? +CNMI=mode,mt +CNMI?CRLF+CNMImode,mt,bm,ds,bfrCR CRLF+CNMIsupported mode list,supported +CNMI=?Mt list,supported bm list,supported ds List,supported bfr list Crlf Yes +CMTIHcmt +CMTI-Command for Indicating the Arrival of a Short Message Hcds HCMT-Command for Reporting a New Short Message Wmstagmtnotread Wmstagmtread Wmstagmonotsent Wmstagmosent CRLF+CDSImem,indexCRLF Crlfhcds reserved,lengthCRLF layer3 CrlfhcdsCallerID,year,month,day,hour,minute,second Lang,format,length,prt,prv,type,tagCRLF Wmstagmtnotread 1：WMSTAGMTREAD +CNMA-Command for Acknowledging a New Short Message ：WMSTAGMOSENT+CNMA Crlfokcrlf +CNMA=? Crlfokcrlf HSMSSS-Command for Setting Short Message Parameters HSMSSS?Crlfokcrlf HSMSSS=? HCMGS-Command for Sending a Short Message Case of an SMS-related error CRLF+CMS ERRORerrCRLFHCMGS=? Crlfokcrlf Text mode HCMGS=da,toda command is sent with the end of CR HCMGSF-Command for Reporting Short Message Sending Failure Parameter Description HCMGW-Command for Storing a Short Message WmsothergeneralproblemsmorelastsCRLF+CMS HCMGW=? Crlfokcrlf Issue 01 Huawei Proprietary and Confidential 100 It saves a message but don‟t send out At HCMGW=44,2 HCMGW1 HCMGL-Short Message List Command HCMGL=? HCMGR-Command for Reading a Short Message CrlfhcmgrCrlfhcmgr ： HCMGR=? Crlfokcrlf Issue 01 Huawei Proprietary and Confidential 104 15 +CMGD-Command for Deleting a Short Message +CMGD=? 17 +CMGF- Command for Set Message Format +CMGF=mode +CMGF? CRLF+CMGFmodeCRLF+CMGF=? CRLF+CMGFlist of supported Phonebook Interface Commands +CPBS-Command for Selecting a Phonebook Memory+CPBS? +CPBS=? CPBR-Command for Reading the Phonebook CrlfcpbrCPBR=? CPBW-Command for Writing Entries to the Phonebook CPBW=? Atcpbw = 1,28780808,129,80534E4E3A,1 Internet Service Interface Commands IPINIT-Command for Initializing a TCP/UDP ConnectionIPINIT? CRLFIPINIT0CRLF Issue 01 Huawei Proprietary and Confidential 113 IPOPEN-Command for Establishing a TCP/UDP Connection IPOPEN?Crlfokcrlf IPOPEN=? IPLISTEN-Command for Enabling Server Listening ATIPOPEN?IPLISTEN? IPLISTEN=? ATIPLISTEN? IPLISTENNULL,0,2 ATIPLISTEN=? IPLISTENTCP,UDP,1-65535,0-5ATIPLISTEN=TCP,12000 ATIPLISTEN? IPLISTENTCP,12000,2 IPSEND-Command for Transmitting TCP/UDP Data IPSEND=linkid,data CRLFIPSENDlinkidCRLFIPSEND=? Crlfokcrlf ATIPSEND=3,ASDF IPSEND3 Crlfipgetdata IPGETDATA?IPGETDATA=? ATIPGETDATA? IPGETDATA0,2,4 IPGETDATA1,2,3 IPDATA-Command for Indicating the Arrival of TCP/UDP Data IPGETDATA2,3,4 ATIPGETDATA=0 IPGETDATA0,2,4ATIPGETDATA=1 IPGETDATA1,2,3 ADF IPCLOSE-Command for Disabling a TCP/UDP Connection IPCLOSE?IPCLOSE=? ATIPCLOSE? IPCLOSE1,1,0,0,0 ATIPCLOSE=1 OK ATIPCLOSE? IPCLOSE0,1,0,0,0IPENTRANS=linkid ATIPENTRANS=1 Audio Commands Swspath -Switch Sound PathCPCM-Configure PCM audio CPCM? PCM CLK 11.4 +CLVL -Tune loudspeaker volume level 11.3 +CMIC -Tune microphone gain level+CMIC? +CMIC=? 11.5 +CMUT -Switch mute status +CLVL=?+CMUT? +CMUT=? Smut -Switch speaker mute status SMUT?SMUT=? Wakeup Commands Wakeupcfg -Wakeup Function ConfigurationWAKEUPCFG? Crlfwakeupcfg WAKEUPCFG=? Query the current configuration parameters Configuration SucceedATWAKEUPCFG? Wakeupcfg 1,1,7 Curc -Unsolicited report control command Crlfokcrlf CURC?CURC=? SAR Commands BODYSARON-Disable or Enable Body SARCrlferrorcrlf Bodysaron ? BODYSARON=? CRLFBODYSARON0,1CRLF Crlfokcrlf Bodysarcdma -Set the max tx Power Limit Crlferrorcrlf BODYSARCDMA?Crlferrorcrlf Bodysarcdma =? THERM-Thermal Protection Activated Usolicited Report Issue 01 Huawei Proprietary and Confidential 133 GPS Commands WPDOM-Command for Setting Operation ModeWPDOM? Crlfokcrlf WPDOM=? Error code Error Description Operation not supported WPDST-Command for Setting Session Type Error code Error descriptionWPDST? Crlfokcrlf WPDST=? Issue 01 Huawei Proprietary and Confidential 137 WPQOS-Command for Setting Fix QoS WPQOS? CrlfwpqosCrlfokcrlf WPQOS=? WPDGP-Command for Starting GPS Position WPEND-Command for ending GPS PositionWpdgp Crlfokcrlf Wpend Crlfokcrlf POSITION-Command for Reporting Position Result 276 GPS function disabled 284 PD session is in off status POSEND-Command for Reporting Position End When position success POSITION：113.94026d,22.53206d, 270m Issue 01 Huawei Proprietary and Confidential 142 WPDIM-Command for Deleting Assisted Data WPDIM=modeWPDIM=? Crlfwpdim list of supported modes GPSTYPE-Command for Quering GPS Type This command queries current GPS typeGPSTYPE? Crlfgpstype typeCRLF If the module support all GPS types ATGPSTYPE? GPSTYPE：31 CME Error List AppendixErr 100 65280 Value +CPWD= +CPIN= +CPIN? +CFUN= +CIMI= +CGSN CPBS= CPBR= CPBW= DTMF= Err Code String TextPhone failure Issue 01 Huawei Proprietary and Confidential 148 Issue 01 Huawei Proprietary and Confidential 149 CMS Error List +CNMI +CMGD +CNMA +CPMS Hcmgs Hcmgw Final Result Codes Final result code Description Initial Values of Command Parameters After MT Restart Phone Number TypeInitial Value Issue 01 Huawei Proprietary and Confidential 153 Acronyms and Abbreviations Abbreviation Full Spelling CTS DCDDCE DCS PPP PRIPRL PUK