Huawei MC509 manual Issue 01 Huawei Proprietary and Confidential 153

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Appendix

Type-of-Number(bit6…bit4): The values are as follows:

0 0 0: This value is selected when the subscriber does not know the check information of the target address number. The address number is organized by the network side.

0 0 1: This value is selected when the subscriber can identity that the number is an international number or the user considers that the number is in the national number range.

0 1 0: The number is a national number without a prefix or a suffix. This value is selected when the subscriber originates a national call.

0 1 1: The number is a specific number on the network and is used for management or service. This value cannot be used by the user.

1 0 1: The number is in the default 7-bit encoding format of the GSM and is not supported at present.

1 1 0: The number is short and is not supported at present.

1 1 1: The number is reserved for extension and is not supported at present.

Numbering-plan-identification(bit3…bit0): The values are as follows:

(Note: bit3…bit0 is valid only when the value of bit6…bit4 is 000,001,010.

0 0 0 0: The number depends on the number scheme on the network side.

0 0 0 1: ISDN/telephone numbering plan

0 0 1 1: data numbering plan, not supported at present.

0 1 0 0: telex numbering plan, not supported at present.

1 0 0 0: national numbering plan, not supported at present.

1 0 0 1: private numbering plan, not supported at present.

1 0 1 0: ERMES numbering plan, not supported at present.

The common phone number types are as follows:

145:international number

129:national number

161:national number without a prefix or a suffix

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	153
	Copyright © Huawei Technologies Co., Ltd.