Huawei MC509 PPPCFG-Command for Setting the PPP User Name and Password, ATDTMF=2,1 ATDTMF=2,#

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Call Control Commands

7.13.2Interface Description

This command sends a dual tone multiple frequency (DTMF) key value to the network through signaling in the call status.

7.13.3Parameter Description

<call_x>: Specifies a call ID. The value ranges from 1 to 9.

<dtmf_digit>: ASCII characters, indicating a DTMF key value. Allowed characters include only 0–9, *, and #. Only one character is allowed each time.

7.13.4Example

AT+CDV10000

OK

^ORIG:2,0

^CONN:2,0

AT^DTMF=2,1

OK

AT^DTMF=2,#

OK

7.14^PPPCFG–Command for Setting the PPP User Name and Password

7.14.1 Syntax

Command	Possible Response(s)
^PPPCFG=<userid>,<password>	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>
^PPPCFG or ^PPPCFG?	<CR><LF>^PPPCFG:<userid>,<password><
	CR><LF>
	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	81
	Copyright © Huawei Technologies Co., Ltd.