Huawei MC509 manual VOLT-Command for Querying the voltage, Volt, Okcrlf, Reset?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Basic Configuration Commands

If the AT+CFUN command is executed without parameters, the operating mode is set to the LPM mode.

2.12 ^VOLT–Command for Querying the voltage

2.12.1 Syntax

Command	Possible Response(s)
^VOLT	<CR><LF>^VOLT:<voltage><CR><LF><CR><LF>
	OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>ERROR<CR><LF>

2.12.2Interface Description

This command queries the current voltage.

2.12.3Parameter Description

<voltage>: Units of mV

2.13^RESET - Command for Delaying the Module Reset Function

2.13.1 Syntax

Command	Possible Response(s)
^RESET[=<delay_time>]	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>
^RESET?	In case of successful execution:
	<CR><LF>^RESET:<delay_time><CR><LF>
	<CR><LF>OK<CR><LF>

2.13.2Interface Description

This command restarts the MT.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	34
	Copyright © Huawei Technologies Co., Ltd.