Huawei MC509 manual 10 +CMEE-Command for Setting the Error Report Format, At+Cgsn, +Cmee?, +Cmee=?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Basic Configuration Commands

AT+CGSN

81042940

OK

A/

81042940

OK

2.10+CMEE–Command for Setting the Error Report Format

2.10.1 Syntax

Command	Possible Response(s)
+CMEE=<n>	<CR><LF>OK<CR><LF>
+CMEE?	<CR><LF>+CMEE:<n><CR><LF>
	<CR><LF>OK<CR><LF>
+CMEE=?	<CR><LF>+CMEE:(supported <n> list) <CR><LF>
	<CR><LF>OK<CR><LF>

2.10.2Interface Description

This command sets whether the returned value uses "+CME ERROR:<err>" to indicate an error related to the MT. If the returned value uses "+CME ERROR:<err>" to indicate an error related to the MT, the error related to the MT generates "+CME ERROR:<err>" to replace "ERROR". When the error cause is unrelated to the MT, "ERROR" is returned.

2.10.3Parameter Description

<n>:

0:The returned value of "+CME ERROR:<err>" is not used, and only "ERROR" is returned in the case of an error.

1:The returned value of "+CME ERROR:<err>" is used, and <err> uses the number value of the error.

2:The returned value of "+CME ERROR:<err>" is used, and <err> uses the detailed string value of the error (default value after startup).

After restart, the value of <n> is 2.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	32
	Copyright © Huawei Technologies Co., Ltd.