Huawei MC509 manual Issue 01 Huawei Proprietary and Confidential 104

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	SMS Interface Commands

0:The short message status is changed to read. (Default)

1:The short message status is not changed.

In case of using the command without <mode>, <mode> is set to 0.

<callerID>: Specifies the number of the short message sender.

<format>: Specifies the encoding format of a short message. The values are as follows:

0:GSM 7 bit (not supported at present)

1:ASCII encoding (when the encoding range is not greater than 7F)

2:IA5 (not supported at present)

3:octet (not supported at present)

4:Latin (not supported at present)

5:Latin_Hebrew (not supported at present)

6:UNICODE encoding (when the encoding range is greater than 7F)

<year, month, day, hour, minute,second>: The year, month, day, hour, minute, and second when a short message is received.

<Length>: Specifies the length of a received short message.

<lang>: Specifies the language. The values are as follows:

0:unspecified

1:English

6: Chinese

<prt>: Specifies the priority of a short message. The values are as follows:

0:normal

1:interactive

2:urgent

3:emergency

<Prv>: Specifies the confidentiality level. The values are as follows:

0:normal

1:restricted

2:confidential

3:secret

<type>: Specifies the type of a short message. The values are as follows:

0: normal

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	104
	Copyright © Huawei Technologies Co., Ltd.