Huawei MC509 manual Call Control Commands, Command for Originating a Data Service Call

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Call Control Commands

7 Call Control Commands

7.1 D–Command for Originating a Data Service Call

7.1.1 Syntax

Command	Possible Response(s)
D[<dial_string>]	<CR><LF>OK<CR><LF>
	<CR><LF>NO CARRIER<CR><LF>
	<CR><LF>CONNECT <text><CR><LF>
	In case of an MT-related error:
	<CR><LF>ERROR<CR><LF>
	<CR><LF>+CME ERROR:<err><CR><LF>

7.1.2Interface Description

This command originates a data service call.

In this product, this command supports only data service dial-up.

7.1.3Parameter Description

<dial_string>: Specifies the called number, consisting of ASCII characters. Allowed characters include only 0–9, *, and #.

7.1.4Example

ATD#777

CONNECT

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	72
	Copyright © Huawei Technologies Co., Ltd.