Huawei MC509 manual OTAACTED-Command for Querying the OTA Activation Status, Otaacted?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Network Service Interface Commands

6.15^OTAACTED–Command for Querying the OTA Activation Status

6.15.1 Syntax

Command	Possible Response(s)
^OTAACTED?	<CR><LF>^OTAACTED:<value><CR><LF>
	<CR><LF>OK<CR><LF>

6.15.2Interface Description

This command queries whether the over-the-air (OTA) interface is activated. The initial value of <value> is 0. If the MT is activated through the OTA interface, the value is 1.

6.15.3Parameter Description

<value>: Specifies the OTA status.

0:not activated

1:activated

6.16^OTACMSG–Command for Indicating the OTA Update Status

6.16.1 Syntax

Command	Possible Response(s)
	<CR><LF>^OTACMSG:<status><CR><LF>

6.16.2Interface Description

This command reports the OTA update status.

6.16.3Parameter Description

<status>: Indicates the OTA update status.

0:initialized

1:Over-the-air service provisioning (OTASP) programming started

2:Service Programming Lock unlocked

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	69
	Copyright © Huawei Technologies Co., Ltd.