Huawei MC509 manual Issue 01 Huawei Proprietary and Confidential 133

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	SAR Commands

13.3.2Interface Description

This command is used to send an unsolicited report to host when entering/exiting thermal protecting state according temperature. This command is affected by AT command ^CURC(if exists).

13.3.3Parameter Description

<Status>: Value that indicates whether thermal protection takes effect. The possible values are defined as below:

0Indicates that the modem has entered thermal protecting state.

1Indicates that the modem has exit thermal protecting state.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	133
	Copyright © Huawei Technologies Co., Ltd.