Huawei MC509 manual Internet Service Interface Commands, Ipinit?, CRLFIPINIT0CRLF, Ipinit=?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Internet Service Interface Commands

10 Internet Service Interface Commands

10.1^IPINIT–Command for Initializing a TCP/UDP Connection

10.1.1 Syntax

Command	Possible Response(s)
^IPINIT[=<APN>[,<user_name>	<CR><LF>OK<CR><LF>
[,<password>]]]	In case of an MT-related error:
	<CR><LF>ERROR<CR><LF>
^IPINIT?	If initialization is performed:
	<CR><LF>^IPINIT:<state>,<ip_address>,<AP
	N>,
	<pri_dns_address>,<sec_dns_address><CR><
	LF>
	<CR><LF>OK<CR><LF>
	If initialization is not performed:
	<CR><LF>^IPINIT:0<CR><LF>
	<CR><LF>OK<CR><LF>
^IPINIT=?	<CR><LF>^IPINIT:(supported <state>
	list)<CR><LF>
	<CR><LF>OK<CR><LF>

10.1.2Interface Description

This command initializes a TCP/UDP connection. After initialization is complete, a local IP address is obtained, enabling the next step to be performed, for example, enabling a TCP connection and transmitting UDP data.

In case of using the command without <user_name> and/or <password>, the user name and password that have been set by running the PPPCFG command are used.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	112
	Copyright © Huawei Technologies Co., Ltd.