Huawei MC509 manual HDRRSSI-Command for Reporting the HDR Rssi, Hdrrssi, Time

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Network Service Interface Commands

6.12 ^HDRRSSI–Command for Reporting the HDR RSSI

6.12.1 Syntax

Command	Possible Response(s)
^HDRRSSI	<CR><LF>^HDRRSSI:<hdrrssi><CR><LF>OK<C
	R><LF>
	<CR><LF>^HDRRSSI:<hdrrssi><CR><LF>

6.12.2Interface Description

The execution command queries the current receive signal strength indicator (RSSI).

When the HDR RSSI change exceeds a threshold, the MT automatically reports the HDR RSSI to the TE.

6.12.3Parameter Description

<hdrrssi>: Indicates the received signal strength. The values are as follows:

0:The strength is equal to or less than –113 dBm.

1:The strength is equal to –111 dBm.

2...30: The strength is between –109 and –53 dBm.

31:The strength is equal to or greater than –51 dBm.

99:The strength is unknown or cannot be measured.

6.13^TIME–Command for Querying the System Time on the Network Side

6.13.1 Syntax

Command	Possible Response(s)
^TIME	<CR><LF>^TIME:<yyyy/mm/dd
	hh:mm:ss><CR><LF>
	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>ERROR<CR><LF>

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	67
	Copyright © Huawei Technologies Co., Ltd.