Huawei MC509 manual Query the current configuration parameters, Atwakeupcfg?, Wakeupcfg 1,1,7

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification			Wakeup Commands
	Bit [3-7]	Bit[2]	Bit[1]	Bit[0]
	Reserved	UART	USB	WAKUP_OU
		(Not Supported)		T
				Pin
	Default Value	3 (Support WAKEUP_OUT Pin+USB)

1:Support WAKUP_OUT Pin only

2:Support USB only

3:Support WAKUP_OUT pin and USB

<source> Parameter to configure remote wakeup source with length of 2 bytes.

This parameter is defined with 16-bit mask. Every single bit represents a remote wakeup source supported by Module. „1‟ represents TURN ON and „0‟ represents TURN OFF. Details are defined as following table”

Bit [4-15]	Bit[3]	Bit[2]	Bit[1]	Bit[0]
Reserved	UR	DATA	SMS	Voice
Default Value		3 (Support Voice+SMS)

12.1.4Example

Query the current configuration parameters:

AT^WAKEUPCFG?

The wakeup function status is TURN ON. The hardware interface to wakeup is WAKUP_OUT PIN. The supported remote-wakeup sources are Voice, SMS and DATA.

^WAKEUPCFG: 1,1,7

Set the wakeup function status TURN ON. The hardware interface to wakeup is set to USB. Supported remote-wakeup sources are Voice, SMS, DATA and UR.

AT^WAKEUPCFG=1,2,15

Configuration Succeed:

OK

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	129
	Copyright © Huawei Technologies Co., Ltd.