Huawei MC509 manual WPDGP-Command for Starting GPS Position, WPEND-Command for ending GPS Position

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification			GPS Commands
	Error code	Error description
	285	Too many parameters

14.5 ^WPDGP–Command for Starting GPS Position

14.5.1 Syntax

Command	Possible Response(s)
^WPDGP	<CR><LF>OK<CR><LF>
	Error:
	<CR><LF>+CME ERROR: <err><CR><LF>

14.5.2Interface Description

This command is used to start a GPS position. Each time only support one position, if it has have a GPS session, then this command will returns error.

14.5.3Parameter Description

<err>: error code or error description

Error code	Error description
4	Operation not supported
276	GPS function disabled
283	PD session is ongoing

14.6 ^WPEND–Command for ending GPS Position

14.6.1 Syntax

Command	Possible Response(s)
^WPEND	<CR><LF>OK<CR><LF>
	Error:
	<CR><LF>+CME ERROR: <err><CR><LF>

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	139
	Copyright © Huawei Technologies Co., Ltd.