Huawei MC509 manual +CPWD-Command for Changing the Password, +Cpwd=?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Security Control Commands

<pin2_times>: Specifies the remaining number of PIN2 entry attempts, and the maximum number of entry attempts is 3 (not supported at present).

4.4 +CPWD–Command for Changing the Password

4.4.1 Syntax

Command	Possible Response(s)
+CPWD=<fac>,<oldpwd>,	<CR><LF>OK<CR><LF>
<newpwd>	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>
+CPWD=?	<CR><LF>+CPWD:supported (<fac>,<pwdlength>)
	list <CR><LF>
	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>

4.4.2Interface Description

The execution command changes the PIN and PIN2 codes of the equipment.

The test command queries the supported equipment and the maximum length of the equipment password.

The password can be changed only when the PIN is enabled (that is, 1 is returned when the +CLCK command is executed for query).

4.4.3Parameter Description

<fac>: A string with double quotation marks. <fac> specifies the equipment (only the R-UIM card is supported, with the value of SC) operated by this command.

"SC": Specifies the PIN code of the R-UIM card.

"P2" : Specifies the PIN2 code of the R-UIM card (reserved and not supported at present).

<oldpwd>,<newpwd>: A string with double quotation marks, specifying the old password and new password. The maximum length is specified by <pwdlength>. The string consists of digits 0–9 only. Otherwise, "ERROR" is returned.

<pwdlength>: Specifies the maximum length of the password of the equipment lock.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	50
	Copyright © Huawei Technologies Co., Ltd.