Remote Commands
Press | To | |
# | ||
| ||
then |
| |
|
| |
|
| |
1 | Repeat current message during | |
| playback. If you press #,1 within | |
| about 4 seconds after a message | |
| begins, the previous message | |
| replays (unless it is the first new | |
| message). | |
|
| |
2 | Play messages. The remote | |
| playback of incoming messages is | |
| limited to 4 minutes. If you have more | |
| messages after 4 minutes have | |
| passed, you must press # 2 again to | |
| listen to the rest of the messages. | |
|
| |
3 | Skip current message during | |
| playback. | |
|
| |
4 | Delete current message during | |
| playback. You can only delete the | |
| current message during playback. | |
| You cannot delete all the messages | |
| stored at one time. | |
|
| |
5 | Stop playback or recording. | |
|
| |
6 | Set the system to answer calls. | |
| Announces the current outgoing | |
| message. | |
|
| |
7 | Record a memo. Announces “Record | |
| your message after the tone.” The | |
| length of a memo recorded by remote | |
| operation must be over 2 seconds | |
| and within 4 minutes. Press #,7 again | |
| or #,5 to stop recording. | |
|
| |
8 | Record a new outgoing message. | |
| Announces “Record your greeting | |
| after the tone.” Press #,8 again or #.5 | |
| to stop recording. | |
|
| |
9 | Set the system to not answer calls. | |
|
| |
0 | Announces the help guidance. | |
|
|
Answering System Operation | 23 |
