Caller ID Messages
Display | Description | |
|
| |
|
| |
D[m0ýNN | Shows the number of new | |
JejWb0ýNN | Caller ID records (records | |
you have not reviewed) | ||
| ||
| and the total number of | |
| records. | |
|
| |
Fh_lWj[ýDWc[ýor | The caller has blocked the | |
Fh_lWj[ýDkcX[h | Caller ID information. | |
|
| |
KdademdýDWc[ | The caller is not within a | |
or Kdademdý | Caller ID service area. | |
DkcX[h |
| |
|
| |
?dYecfb[j[ý:WjW | Appears if there was an | |
| error during the | |
| transmission of Caller ID | |
| information. Occasional | |
| errors are normal. If the | |
| phone frequently displaysý | |
| ?dYecfb[j[ý:WjW, contact | |
| your local telephone | |
| company or RadioShack | |
| store. | |
|
|
ADDING/DELETING THE AREA CODE
When the area code of the received call is the same as the one you stored (see “Storing Your Area Code” on Page 10), the caller ID record does not show the area code. If it is different, the record shows the area code.
However, you can add or delete the area code on the display. When the record is on the display, press 3 to add or delete the area code. Pressing 3 again deletes or adds the area code.
When you dial the number or store it into memory, the phone dials or stores the number as it appears on the display.
DIALING NUMBERS FROM A CALLER ID RECORD
To dial a local number stored in a Caller ID record, recall the record, then press TALK. If it is a long distance call, press 1 (' appears before the displayed number) before you press TALK. If you want to add or delete the area code, press 3 before you press TALK.
Note: If a Caller ID record does not contain a phone number (if it was blocked by the caller, for example), you cannot dial from that record.
STORING A CALLER ID RECORD IN MEMORY
1.Press CALL ID, then 8 or 9 to recall the record you want to store.
If it is a long distance number, press 1.
If you want to add or delete the area code, press 3.
2.Press MEM. I[b[YjýBeYWj_ed appears.
3.Choose a memory location
If the selected location is empty, the phone beeps to confirm that it stored the number, then the Caller ID record appears.
If a record exists in the selected location, H[fbWY[ýC[ceho5 appears, prompting you to confirm the replacement. Move the cursor to O[i or De, then press SELECT.
DELETING CALLER ID RECORDS
You can delete Caller ID records individually or all at once.
16 | Caller ID Operation |
