Huawei MC509 Security Control Commands, When mode≠2 and the command is successfully, +Clck=?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Security Control Commands

4 Security Control Commands

4.1+CLCK–Command for Enabling the PIN and Querying the Status

4.1.1 Syntax

Command	Possible Response(s)
+CLCK=<fac>,<mode>	When <mode>=2 and the command is successfully
[,<passwd>[,<class>]]	executed:
	<CR><LF>+CLCK:<status><CR><LF>
	<CR><LF>OK<CR><LF>
	When <mode>≠2 and the command is successfully
	executed:
	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>
+CLCK=?	<CR><LF>+CLCK:(supported <fac> list)<CR><LF>
	<CR><LF>OK<CR><LF>

4.1.2Interface Description

The execution command locks or unlocks the R-UIM card and query the locking status.

The test command queries the equipment supported by this command.

4.1.3Parameter Description

<fac>: Specifies the equipment on which this command is executed.

"SC": R-UIM card

<mode>: Specifies the operation mode. The values are as follows:

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	46
	Copyright © Huawei Technologies Co., Ltd.