Huawei MC509 Wakeup Commands, Wakeupcfg -Wakeup Function Configuration, WAKEUPCFG? Crlfwakeupcfg

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Wakeup Commands

12 Wakeup Commands

12.1 ^WAKEUPCFG -Wakeup Function Configuration

12.1.1 Command Syntax

Command	Possible response(s)
^WAKEUPCFG=<n>[,	<CR><LF>OK<CR><LF>
<channel>[,<source>]]	Errors about MT：
	<CR><LF>+CME ERROR:<err><CR><LF>
^WAKEUPCFG?	<CR><LF>^WAKEUPCFG:
	<n>,<channel>,<source><CR><LF><CR><LF>OK<CR>
	<LF>
^WAKEUPCFG=?	<CR><LF>^WAKEUPCFG: (list of supported <n>s),(list of
	<channel>s),(list of supported <source>s)
	<CR><LF><CR><LF>OK<CR><LF>

12.1.2Description

This command is used to configure module‟s wakeup function by host, including the hardware interfaces supported, and the supported remote-wakeup sources.

12.1.3Defined Values

<n> The status of wakeup function

0: Turn off the wakeup function；

1 : Turn on the wakeup function (Default)；

<channel> Option of hardware interfaces that support wakeup with length of 1 byte.

The supported hardware interfaces are defined with 8-bit mask. Every single bit represents the status of one kind of hardware interface. „1‟ represents TURN ON and „0‟ represents TURN OFF. Details are defined as following table:

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	128
	Copyright © Huawei Technologies Co., Ltd.