Huawei MC509 manual IPCLOSE1,1,0,0,0, ATIPCLOSE=1 OK ATIPCLOSE? IPCLOSE0,1,0,0,0, IPENTRANS=linkid

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Internet Service Interface Commands

^IPCLOSE:1,1,0,0,0

OK

AT^IPCLOSE=1

OK AT^IPCLOSE? ^IPCLOSE:0,1,0,0,0

OK

10.8^IPENTRANS–Command for Enabling the Transparent Transmission Mode

10.8.1 Syntax

Command	Possible Response(s)
^IPENTRANS=<link_id>	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>ERROR<CR><LF>

10.8.2Interface Description

This command enables the TCP transparent transmission mode. In this mode, there is no length restriction on the subscriber data being transmitted to the remote end through a TCP connection.

After "OK" is returned, a subscriber can continuously enter data and transmit the data to the remote end.

If a subscriber continuously enters +++, the transparent transmission mode is disabled.

A UDP connection does not support this mode.

10.8.3Parameter Description

<link_id>: Specifies the ID of an established connection. The value ranges from 1 to 5.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	121
	Copyright © Huawei Technologies Co., Ltd.