Huawei MC509 manual SYSINFO-Command for Querying System Information, Sysinfo

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Network Service Interface Commands

6.2^SYSINFO–Command for Querying System Information

6.2.1 Syntax

Command	Possible Response(s)
^SYSINFO	<CR><LF>^SYSINFO:<srv_status>,<srv_domain>,<ro
	am_status>,
	<sys_mode>,<sim_state>[,<lock_state>,<sys_submod
	e>]<CR><LF>
	<CR><LF>OK<CR><LF>

6.2.2Interface Description

This command queries the current system information, such as the system service state, domain, whether to roam, system mode, and state of the R-UIM card.

6.2.3Parameter Description

<srv_status>: Indicates the system service state. The values are as follows:

0:no service

1:restricted service (not supported by this product)

2:valid service

3:restricted regional service (not supported by this product)

4:power-saving and deep sleep state

<srv_domain>: Indicates the service domain of the system. The values are as follows:

0:no service domain

1:only CS service

2:only PS service

3:PS+CS service

4:CS and PS are not registered, searching

255:This fixed value is always returned because the product does not support this parameter.

<roam_status>: Indicates the roaming state. The values are as follows:

0:non-roaming state

1:roaming state

<sys_mode>: Indicates the system mode. The values are as follows:

0: no service

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	59
	Copyright © Huawei Technologies Co., Ltd.