Huawei MC509 Phonebook Interface Commands, +CPBS-Command for Selecting a Phonebook Memory, +Cpbs?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Phonebook Interface Commands

9 Phonebook Interface Commands

9.1+CPBS–Command for Selecting a Phonebook Memory

9.1.1 Syntax

Command	Possible Response(s)
+CPBS=<storage>	<CR><LF>OK<CR><LF>
[,<reserved>]	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>
+CPBS?	<CR><LF>+CPBS:<storage>,<used>,<total><CR><LF>
	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>+CME ERROR:<err><CR><LF>
+CPBS=?	<CR><LF>+CPBS:(supported <storage> list)<CR><LF>
	<CR><LF>OK<CR><LF>

9.1.2Interface Description

The set command selects a phonebook memory. The initial setting is "SM" after the MT is restarted. Other phonebook-related commands are executed on the phonebook memory selected by this command.

The currently selected phonebook memory, number of used entries, and maximum number of entries are returned when the read command is executed.

The supported phonebook memory type is returned when the test command is executed.

9.1.3Parameter Description

<storage>: Specifies the type of the phonebook memory.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	108
	Copyright © Huawei Technologies Co., Ltd.