Huawei MC509 GPS Commands, WPDOM-Command for Setting Operation Mode, Wpdom?, Crlfokcrlf WPDOM=?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	GPS Commands

14 GPS Commands

14.1 ^WPDOM–Command for Setting Operation Mode

14.1.1 Syntax

Command	Possible Response(s)
^WPDOM=<mode>	<CR><LF>OK<CR><LF>
	Error:
	<CR><LF>+CME ERROR: <err><CR><LF>
^WPDOM?	<CR><LF>^WPDOM: <mode><CR><LF>
	<CR><LF>OK<CR><LF>
^WPDOM=?	<CR><LF>^WPDOM: (list of supported <mode>s)
	<CR><LF>
	<CR><LF>OK<CR><LF>

14.1.2Interface Description

This command is used to set the position operation mode. Read command can queries current operation mode, Test command returns supported operation mode. SET command can only be used before position session beginning or after end, can‟t be used during positioning, or will be error.

14.1.3Parameter Description

<mode>: operation mode, default value is 0, no storing at power down

0: standalone only mode，no network assistance is required, and the MS can be in or out of network coverage.

1: network only mode，MS operates in MS-assisted position calculation mode only, MS communications with AGPS server for every position fix, and every fix is calculated by AGPS server. Both PDE/PDM access and network coverage are required for this mode of operation. If this mode failed, it‟ll switch to Cell-ID mode.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	134
	Copyright © Huawei Technologies Co., Ltd.