Huawei MC509 manual AT+IFC is equivalent to AT+IFC=0,0

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Serial Port Control Commands

1:software flow control (XON/XOFF) (not supported at present)

2:Request to send (RTS) signal

3:XON/XOFF, and the XON/XOFF is sent to the remote TS to supplement local flow control (not supported at present)

<DTE_by_DCE>:

0:none (default value after startup)

1:XON/XOFF (not supported at present)

2:Clear to send (CTS) signal

AT+IFC is equivalent to AT+IFC=0,0.

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	57
	Copyright © Huawei Technologies Co., Ltd.