Huawei MC509 HSMSSS-Command for Setting Short Message Parameters, Hsmsss?, Crlfokcrlf HSMSSS=?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	SMS Interface Commands

8.8^HSMSSS–Command for Setting Short Message Parameters

8.8.1 Syntax

Command	Possible Response(s)
^HSMSSS=<ack>,<prt>,	<CR><LF>OK<CR><LF>
<fmt>,<prv>	In case of an SMS-related error:
	<CR><LF>+CMS ERROR:<err><CR><LF>
^HSMSSS?	<CR><LF>^HSMSSS:<ack>,<prt>,<fmt>,<prv><CR><L
	F>
	<CR><LF>OK<CR><LF>
^HSMSSS=?	<CR><LF>^HSMSSS:(supported <ack> list),(supported
	<prt> list),(supported <fmt> list),(supported <prv>
	list)<CR><LF>
	<CR><LF>OK<CR><LF>

8.8.2Interface Description

The set command sets parameters for sending short messages, including whether to acknowledge, priority, encoding format, and confidentiality.

NOTE

This AT command is only effective in text mode.

8.8.3Parameter Description

<ack>: Specifies whether a short message status report is required. The values are as follows:

0:The short message status report is not required (default value after startup).

1:The short message status report is required.

<prt>: Specifies the priority of a short message. The values are as follows:

0:normal (default value after startup)

1:interactive

2:urgent

3:emergency

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	94
	Copyright © Huawei Technologies Co., Ltd.