Huawei MC509 manual 11.5 +CMUT -Switch mute status, +Clvl=?, +Cmut?, +Cmut=?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification			Audio Commands
	Command	Possible response(s)
	+CLVL=?	<CR><LF>+CLVL: (list of supported <level>s)
		<CR><LF><CR><LF>OK<CR><LF>
		<CR><LF>+CME ERROR: <err><CR><LF>

11.4.2Description

This command is used to select the volume of the internal loudspeaker of the MT.

Test command returns supported values as compound value.

11.4.3Defined values

<level>: 0~5 integer type value with manufacturer specific range (smallest value represents the lowest sound level). 0 means mute. Default value is 2. Resetting the module will not affect the value. Module updating will reset the value to default value.

11.5 +CMUT -Switch mute status

11.5.1command syntax

Command	Possible response(s)
+CMUT=<n>	<CR><LF>OK<CR><LF>
	<CR><LF>+CME ERROR: <err><CR><LF>
	<CR><LF>OK<CR><LF>
+CMUT?	<CR><LF>+CMUT: <n><CR><LF>
	<CR><LF>OK<CR><LF>
	<CR><LF>+CME ERROR: <err><CR><LF>
+CMUT=?	<CR><LF>+CMUT: (list of supported <n>s)
	<CR><LF><CR><LF>OK<CR><LF>

11.5.2Description

This command is used to enable and disable the uplink voice muting during a voice call.

Test command returns supported values as compound value.

11.5.3Defined values

<n>:

0mute off (default)

1mute on

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	126
	Copyright © Huawei Technologies Co., Ltd.