Huawei MC509 manual +CMTI-Command for Indicating the Arrival of a Short Message, Hcds

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	SMS Interface Commands

^HCDS: [<reserved>],<length><CR><LF> <layer3 packet><CR><LF>

If Text mode enabled:

^HCDS:

<callerID>,<year>,<month>,<day>,<hour>,<minute>,<second>,<lang>,<format>,<len gth>,<prt>,<prv>,<type>,<tag><CR><LF><msg><ctrl-z><CR><LF>

2:The short message return receipt is stored in the MT, and a storage position notification is sent to the TE by using the +CDSI command. (default value after startup).

+CDSI：<mem>,<index><CR><LF>

<bfr>: Set the buffer processing when <mode>=1, 2 is entered from <mode>=0.

0:In the <mode>1-2 mode, MS sends all URCs to TE in one time. (default value after startup)

1:In the <mode>1-2 mode, clear all URCs..

8.2.4Example

Set CNMI=1,1,0,1,0.

A new short message is stored in the MT, and the storage position is reported by running the +CMTI:"ME",1 command. A status report short message is not stored but is reported by using the ^HCDS command.

If a message notification cannot be reported (for example, in the online-data mode), the message notification is discarded.

8.3+CMTI–Command for Indicating the Arrival of a Short Message

8.3.1 Syntax

Command	Possible Response(s)
	<CR><LF>+CMTI:<mem>,<index><CR><LF>

8.3.2Interface Description

This command indicates that a new short message or a new status report short message has been received.

8.3.3Parameter Description

<mem>: Specifies the storage medium of a short message. Currently, only "SM" and "ME" are supported.

"ME": ME short message storage medium

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	88
	Copyright © Huawei Technologies Co., Ltd.