Huawei MC509 manual HRSSILVL-Command for Reporting the HDR Rssi, Rssirep?, Rssirep=?

HUAWEI MC509 CDMA LGA Module
AT Command Interface Specification	Network Service Interface Commands

6.9 ^HRSSILVL–Command for Reporting the HDR RSSI

6.9.1 Syntax

Command	Possible Response(s)
	<CR><LF>^HRSSILVL:<rssi><CR><LF>

6.9.2Interface Description

When the HDR RSSI change exceeds a threshold, the MT automatically reports the RSSI to the TE.

6.9.3Parameter Description

<rssi>: Indicates the received signal strength. The values are as follows:

0:no signal

20:one bar

40:two bars

60:three bars

80:four bars

99:five bars

6.10^RSSIREP–Command for Setting the Reporting of the RSSI

6.10.1 Syntax

Command	Possible Response(s)
^RSSIREP=<value>	<CR><LF>OK<CR><LF>
	In case of an MT-related error:
	<CR><LF>ERROR<CR><LF>
^RSSIREP?	<CR><LF>^RSSIREP:<value><CR><LF>
	<CR><LF>OK<CR><LF>
^RSSIREP=?	<CR><LF>^RSSIREP:(supported <value>
	list)<CR><LF>
	<CR><LF>OK<CR><LF>

Issue 01 (2011-08-26)	Huawei Proprietary and Confidential	65
	Copyright © Huawei Technologies Co., Ltd.